NUARL NT01 HDSS True Wireless Bluetooth In-Ear Earphone with Mic - Matte Black

High quality HDSS totally wireless earphone with Bluetooth5＋5hr.

NUARL NT01 HDSS True Wireless Stereo Earphones are totally separate and wireless earphones combining our original specialty and technology.

With latest wireless technology and acoustic equipment compressed into the 5g light body, we were able to balance out the connection stability of wireless earphones with clear, live music playing. Along with maximum 5 hr.

Original “Broad” Design.

Fully asymmetric design helps you distinguish which side you’re wearing.

Buttons on top makes it easy to press even with long fingernails or with gloves on,without pressuring the ears while controlling.

The inner side of the earphones are coated with nano-coating,providing water resistance equal to IPX4,providing stable control even with wet hands.

You may choose between 2 colors of “Matte Black” and “Black Silver”.

1st in the world to adopt HDSS for totally wireless earphones on the market

To pursue the “sound quality” while playing music beingthe 1st priority of earphones, we adopted patented technologyHDSS for our totally wireless earphones.

The ETL acoustic module installed inside would hold down noises toprovide clear sound.

This prevents in-of-head sound localization caused bycanaled type earphones which you insert into your ears, recreating natural sounds.

The Qualcomm Kalimba DSP installed uses digital equalizing to tune the soundwhich best fit our totally wireless earphones.

Combining Native Bluetooth 5 with our original antenna technology.

Combining Native Bluetooth 5 with our original antenna technology.

We adopted the latest chip set by Qualcomm Corp.,developed strictly for totally wireless earphoneswhich fits the full spec of Bluetooth 5.

The connection of both sides combines our originalMCA (Mutual Coupling Antenna) technology with“Qualcomm TrueWireless Stereo” technology tobalance out the stability of wireless connection and low noise.

Compatibility with versions before Bluetooth 5 isstill available, allowing you to use it on any version of Bluetooth.

Notify remaining battery to eyes and ears.

The remaining battery of master earphone will be displayed on your smartphone,while the slave earphone’s remaining battery can be confirmed by LED.

Voice message will be sent when remaining battery reaches recharging area.

The remaining battery for the recharging case is shown by LED in 4 levels.

Relieved from connecting complexity of totally wireless earphones.

Both sides of earphones are set for master and slave.

Only the master earphone is required to pair with the smart phone for connection.

The automatic reconnection function allows the earphones set in the case to reconnect automatically simply by opening the cover,with no need to reconnect manually.

Connection during fitting is announced by voice message.

Pairing information of up to 8 smart phones can be memorized,so you would not have to pair againwhen switching smart phones.
(*not supported for multi-point)

Continuous playtime andpower saving functions installed.

Earphone itself can play continuously up to 5 hr.
(12 hr. if used with recharging case).

The power saving function puts the earphones intosleep mode to reduce power using when not playing.

Power can be switched on/off by earphone itself,reducing the necessity to use recharging case.

Power can be turned off both sides bysimply controlling either side.

Controlling Smart Phone.

The buttons on the left side of the earphone are capablefor controlling the playlist of your smart phone/receiving calls/refusing/ending,and starting up voice commands.
*Buttons on the right side allows you to adjust the volume.

The master earphone is equippedwith high sensitive microphone for speaking and inputting voice commands.

Continuous playtime andpower saving functions installed.

Earphone itself can play continuously up to 5 hr.
(12 hr. if used with recharging case).

The power saving function puts the earphones intosleep mode to reduce power using when not playing.

Power can be switched on/off by earphone itself,reducing the necessity to use recharging case.

Power can be turned off both sides bysimply controlling either side.

Original “Broad” Design.

Fully asymmetric design helps you distinguish which side you’re wearing.

Buttons on top makes it easy to press even with long fingernails or with gloves on,without pressuring the ears while controlling.

The inner side of the earphones are coated with nano-coating,providing water resistance equal to IPX4,providing stable control even with wet hands.

You may choose between 2 colors of “Matte Black” and “Black Silver”.

Original “Dual Insert Nozzle” tobalance out fitness and sound quality.

We adopted dual insert nozzle,by providing ear pieces with totally different characteristics.

Comes with 2 types of silicon-made ear pieces,with “Fitting type” allowing you to fit the tip of the nozzleand fill up the earhole, and “Plug-in type” inserts the nozzle deepinto your ear to provide more sound insulation.

Both can be used to satisfy your fitness or sound quality.

Both types of ear pieces have high sound insulation,and comes with 2 sizes of ear-loops for better fitness.

The earphones weigh less than 5 g, providing absolutely no stress when using.

Comes with recharging case (battery installed)for high-speed recharging.

Recharging case is built for high-speed recharging.

About 1.5 hr. will charge up your earphones’ battery from empty to full,while only a 15 min. charge will give you up to 1 hr. of playtime.

You can recharge up to 1.5 times for empty battery earphones,with soft porch included to carry your earphones and recharging case.